Revo™ Series Freeze Dryers
Revo™ Series Freeze Dryer:
- Shelf Area from 2 Sq ft to 10 Sq ft
- Full PC/PLC Control Standard
- High speed ethernet connection
- Remote network access
- Redundant data logging with high speed data acquisition
- -53C or -85C Condenser Temperature
- 30L Condenser Capacity
- Remote Condenser with Hot Gas Defrost
- From 1 to 5 Shelves in Bulk or Stoppering
- -45C or -70C Shelf Temperature
- Fluid Filled Hollow Shelves, 12″x 24″ Each
- Rectangular 316L Chamber
- 12PSI Hydraulic Stoppering
- Pirani Pressure Control and Gas Backfill Standard
- New! Opti-Dry™ Auto Run optimization software option
- New! Hydrogen Peroxide Compatibility
- Isolator Interface Option
- Revo™ Protocol Development System (Click for more information)
A rectangular chamber within the Revo™ Series Freeze Dryer offers a compact profile with either stoppering or bulk assembly. Hydraulic stoppering is provided by a bottom up hydraulic cylinder. Both options have a radiant heat plate above the top shelf for uniform drying on all shelves. All internal surfaces are constructed of 316L stainless steel and offer a polish of 20 Ra or better.
A coil condenser is located between the product and the vacuum pump providing maximum condensing surface area and vacuum pump System Specifications protection. A 4″ vapor port connects the two chambers, with a 6″ option. An isolation valve can be added for end of drying testing. Hot gas is used for defrosting the condenser when drying is complete.
Fluid filled hollow shelves with a serpentine fluid path provide the most uniform shelf temperature possible resulting in consistent and repeatable drying. All units come with one product tray per shelf, either a removable bottom or bulk.
Options include a Shelf Latching Kit, Isolation Valve, Capacitance Manometer, Moisture Sensor, Clean Room configuration, Sample Extractor, 6″ vapor ports, and much more.
| Model | RD53 | RD85 |
| Condenser Temperature | -53 | -85 |
| CondenserCapacity | 30L Max : 20L in 24 hrs | |
| ShelfTemperature | -45 C to +65 C | -70 C to +65 C |
| Refrigeration | 3.5 HP ScrollCFC-Free | 3.5HP Scroll and2HP ScrollCFC-Free |
| VaccuumPumpRequired | 375 LPM | |
| Dimensions | 35″W x 45″D x 73″H | |
| Electrical | 230V,60Hz 40A,1PH50Hz Option Available |
|
| Shelves | Areasq ft/sq m | Clearancein/mm |
| 1 | 2 / 0.186 | 11.5 / 292 |
| 2 | 4 / 0.373 | 5.5 / 139 |
| 3 | 6 / 0.559 | 3.5 / 89 |
| 4 | 8 / 0.746 | 2.5 / 63 |
| 5 | 10 / 0.932 | 1.9 / 48 |
| Vial | Diam | Ht | 1 | 2 | 3 | 4 | 5 |
| 2 ml | 16 | 41 | 730 | 1460 | 2190 | 2290 | 3650 |
| 5 ml | 22 | 48 | 398 | 796 | 1194 | 1592 | |
| 10 ml | 24 | 58 | 336 | 672 | 1008 | 1344 | |
| 20 ml | 29 | 71 | 220 | 440 | 660 | ||
| 50 ml | 43 | 81 | 91 | 182 | 273 | ||
| 100 ml | 52 | 92 | 66 | 132 |
| Depth (mm) | 1 | 2 | 3 | 4 | 5 |
| 10 | 1.8 | 3.6 | 5.4 | 7.2 | 9.0 |
| 15 | 2.7 | 5.4 | 8.1 | 10.8 | 13.5 |
| 20 | 3.6 | 7.2 | 10.8 | 14.4 | 18.0 |
Opti-Dry™ Control Features for the Revo™ Series Freeze Dryer
| Automatic | 10 Freezing Steps16 Drying Steps with Pressure Control1 Step Secondary and 1 Step Final DryingAlarms, Recipe Management, Data Logging |
| Manual | Individual Switches for Shelf, Condenser, Vacuum, Control, Isolation Valve, and Release. Single Setpoints for Shelf and Vacuum. |
| Defrost | Automatic Timed Hot Gas |
| System Test | Performance Evaluation of Shelf, Condenser, Vacuum, Heating, and Control |
| Leak Rate | Automatic Testing of System Performance |
| Maintenance | Independent Operation of Components, with Troubleshooting and Calibration |
| Opti-Dry™ Pro Features | See Opti-Dry Control System for Control Options |
