BenchTop Manifold Freeze Dryers
Millrock has responded to customer demand for a cost effective high performance bench-top manifold freeze dryer. The BENCHTOP Series takes a market proven design and has added the most advanced microprocessor control available on a bench-top unit.
The BENCHTOP Series boasts a 2L per 24 hour condensing rate. For water based samples, –48C condenser is the perfect choice. For samples containing solvents or with low eutectic points, –85C condenser provides maximum performance.
For labs that need quick turn-around, hot gas defrost supplies fast/automatic defrosting. Choose either a 6 or 12 port manifold. Both provide ample space for small and large samples to be dried simultaneously. Straight-thru vacuum valves offer a more direct vapor path.
Use Millrock’s Stainless Freezedryware™ to dry bulk product or quantities of small vials
CONSOLE MANIFOLD HIGHLIGHTS
- Advanced microprocessor controls
- Manifold dryer with 24 or 48 Ports
- 316L construction on all wetted parts
- 2 liters in 24 hours, 2L capacity
- Exposed coil condenser for maximum efficiency
- Hot gas defrost
- CFC-Free, non-proprietary refrigerants
- Hot gas defrost
- 195LPM corrosion resistant vacuum pump
|TEMPERATURE||-48 C||-85 C|
|CONDENSER CAPACITY||2L in 24 hr||2L in 24 hr|
|COMPRESSOR||1/3 HP||2 x 1/3 HP|
|CABINET DIMENSIONS||15.5″W x25.0″D x15.75″ H||15.25″W x25.0″D x15.75″H|
|VOLTAGE||120V, 60Hz,1 Ph, 20A||120V, 60Hz,1 Ph, 20A|
Benchtop Manifold Freeze-Dryer
- Laboratory Research
- Organic Tissues
- Waste Products
- Plant Material
|Download our brochure for The BT Series|
|Request a Quote Now!!!|
3Gen Microprocessor Controls
Millrock has taken bench-top freeze-drying to a new level with the new 3Gen control system. Millrock’s team first developed features like the ‘ready’ indicator and auto power-outage recovery, and we now bring you ‘3rd Generation’ controls with a display that is easy to read and intuitive.
With a backlit display and industrial tested microprocessor, freeze drying has never been easier. Display parameters include vacuum, condenser temperature, run time, ambient temperature, and even displays when to maintain your vacuum pump oil.
|DISPLAY||Backlit Matrix LCD
|VACUUM DISPLAY||0 to 3000 mTorr|
|CONTROL FEATURES||Auto Start-up
Power Failure Recovery
|ALARMS & REMINDERS||Low Voltage
Change Vacuum Pump Oil
Clean Air Condenser
A 6 or 12 port manifold is provided with the Benchtop series dryer and comes complete with vacuum valves. Each port is ½” external diameter. The ports are spaced to provide room for the largest flasks.
The straight-thru design of Millrock valves provide less flow restriction and have greater internal diameter than other ¾” diameter valves. The end result is faster, more consistent drying.
A 60 lpm vacuum pump is recommended.
A complete line of flaskware is offered by Millrock, including flasks from 75 ml to 1200 ml with snap-on silicone tops.
Freezedryware provides the perfect solution to bulk drying and drying vials on a manifold freeze drying system.
Glass adapters provide an easy connection from the vacuum valve to hoses and other accessories. ¾” to ¾” and ¾” to ½” adapters are available in both straight and 45 degree.
For a complete list and comparison of all our Freeze Dryers, please visit our main Freeze Dryer page.